ProTech™ Wear Plates

H-E Parts is able to offer a full suite of wear plate products from our ProTech™ range, and provide material selection and condition monitoring services to improve the likelihood of wear liners lasting to planned shutdowns. This is done by analyzing localized wear over a set of wear liners, and then selecting material grades and thicknesses based on actual wear rates and required life. The result is a liner set that may contain a combination of the following materials:

  • Chromium Carbide Overlay Wear Plate
  • Tungsten and Titanium Carbide Plate
  • Quenched and Tempered Plate
  • White Iron Wear Bars, Blocks and Buttons
  • Rubber / Polyurethane Embedded Ceramic Liners

Chromium Carbide Wear Plate

H-E Parts supplies ProTech™ chromium carbide overlay wear plate to suit all applications from ore bins to dump truck bodies. H-E Parts ProTech™ chromium carbide overlay wear plate is bolted or welded onto equipment high wear areas to enhance wear resistance.
H-E Parts is recognized as one of the leading suppliers of wear resistant plate for the mining and quarrying industries and supplies to some of the largest mining companies in the world.


ProTech™ Chromium Carbide overlay wear plate is available in the following grades:

  • PT-60
  • PT-80
  • PT-80T


  • Chute Liners
  • Bucket liners
  • Dump truck trays
  • Feed plates
  • Crusher liners
  • Trough liners
  • Pipework
  • Screen plates
  • Mobile equipment

H-E Parts can also custom fabricate wear plate to suit your specific requirements.

Tungsten Carbide Wear Plate

For applications where standard overlay plate is not effective, H-E Parts can offer a range of tungsten and titanium carbide overlay plates from its ProTech™ wear products range that provide significant increases in life over conventional overlay plate. While these materials can offer significant cost savings on a cost-per-tonne basis, H-E Parts unique wear modeling approach provides for the use of a range of different wear materials to ensure the lowest total cost of ownership.

The ProTech™ tungsten carbide overlay plate product is ideal for fine particle abrasion with low impact and has the potential to outlast conventional overlay plate by more than 20 times in some applications. After completing a full evaluation of the wear area, H-E Parts is able to design a liner arrangement that may contain several different materials and overlay thicknesses. The result ­­can be a liner assembly that wears uniformly throughout and provides a consistent life that corresponds to planned shutdown intervals.


ProTech™ quenched and tempered wear plate is a superior choice in abrasion resistant steels and is synonymous with high quality, flatness and surface finish.

Although ProTech™ quenched and tempered plate is 3-4 times harder than ordinary high strength structural plate, its excellent weldability and machinability properties make the material remarkably easy to work with.

ProTech™ quenched and tempered plate boosts plant performance and maximizes the uptime of your plant.


The ProTech™ quenched and tempered plate is available in grades PT-450Q, PT-500Q, and PT-600Q and is suitable for a variety of applications such as:

  • Excavators
  • Tipper bodies
  • Training Plates
  • Conveyors
  • Crushers
  • Mixers